Pegasus Hobbies – Making Your Table Shine Without Eviscerating Your Wallet

Circus friends, I’ve decided that I’ve been remiss in not sharing with you the vast pool of knowledge that I’ve learned over the years regarding tabletop miniatures gaming, and so this is the first of many articles that will pass on some of the laborious research I’ve carved out of the Internet. The tag will be “Miniatures Gaming 101” and I’ll be putting articles ranging from figure sources, game rules, painting tip sites, terrain building help, the best books to buy, and all manner of things relating to all things miniature. I’m not a great figure painter, though I can hold my own, but I am a very capable terrain builder, so I’ll likely share some of my projects with you fine folks as well. So, let’s begin with a great source of material to quickly and cheaply get a table going for a skirmish: Pegasus Hobbies (PegasusHobbies.net).

There was a time, so long ago, that I was playing Battletech, Mage Knight, and all manner of miniature game on paper mats. Yes, they do serve a purpose, but why would you want to if you didn’t have to, and further, if it wasn’t prohibitively expensive? It’s because I didn’t know just how many miniatures companies are out there, nor did I know just how inexpensive miniatures terrain can be if you know where to look. Well, I was at a game store just before I got sick a year and a half ago, and I saw this wonderful, detailed church sitting on a Warhammer table. After inquiring, it turns out that the guy spent all of two hours painting and assembling it, and the amazing part, he spent just over twenty dollars on it.


I immediately got online and found that this company’s products are both inexpensive and ubiquitous, and so I jumped in with both feet and got both a Gothic City Ruins and the same church set that I had seen at the store. As soon as I got it home I realized just how easy it was going to be to turn the box into what would be the ruins of the Esoteric Order of Dagon church, an ancient, decaying factory, the burned-out hulk of an old apartment building, and so many other terrain features. Within an hour I had glued it and assembled it, and because I tend to overthink things, three hours later I had the whole thing primered, painted, blackwashed, and three-color drybrushed. It is simply amazing how wonderful these things look once you’ve got them painted. 

I’m never one to do something half-assed, so I took it further once I’d had it for a year and really got interested in making beautiful landscapes to play on, so I then based the entire set, flocked it (including adding moss to the model), and put another ten dollar Pegaus set of rubble in the center to create the illusion that the top of the building had fallen in long ago. In all, it looks just like I hoped it would, and I’m out maybe a total of 6 hours time and forty bucks in materials. That said, it was very nice looking with a simple blackwash/drybrush treatment, and the flexibility of the sets are such that if you were to buy two, you could present them on the table as four sides of the same ruined building. 

The second set I got was, as I noted, the church itself. The beauty of these sets is that you can make them in a great many configurations, and so I made mine a little non-standard, since I’m a pretty non-standard individual myself. I ended up making it an “evil church”, airbrushing the entire thing flat black and following with a grey drybrush treatment. I also airbrushed ~flame light~ on and around the lanterns but it didn’t turn out as well as I liked. It’s still got some work to go, a year later or so, but it’s been good enough for my table so I haven’t put effort into it to get it to what I consider “quality work”.

About a month ago I downloaded and printed the free rules for “The Skank Game”, otherwise known as Warlords of the Wasteland 2085, which is a post-apocalyptic skirmish game that includes vehicles and very light RPG elements. I was looking for a Fallout-esque game and therefore I needed to have some post-apocalyptic game pieces. Well, a forum member at Fortress:AT was talking about Pegasus’ Syberclicks terrain, which is the Warhammer 40K equivalent of the Hexagon terrain (shown left), so I bought both the large and small packs, which cost a total of $32.00. Well, let me tell you, it’s really quite modular in that you can build virtually anything you can imagine, much like Lego products, but with a very “hodge-podge”, scavenged feel to the buildings. As usual, I couldn’t follow the directions as listed, so with the small set I made something not remotely resembling the shown product, which integrated into the walled wasteland outpost I

created using the large set. The wife likes it, and she’s a tough customer to please, so I’m content. It’s very lightweight, so I think it really will need to have a base on it to sturdy it up. It snaps together with these clips that I believe were sent by the Devil himself, because after 2 hours of modelling, my fingers were LITERALLY bleeding. They’re a real bitch to assemble, no doubt, but it’s worth it. As you can see from the photo of the frames, there’s a bazillion little rippy bits and each one is sharp as a razor, even after you’ve removed them from the frame. The clips come in six styles, from 90 degrees to multi-angle three-way, and there’s a lot of flexibility in what you can do. Again, these things bite into your hand like a spur when you assemble the buildings, so be advised that you will not get out of this without some serious finger damage. I’d argue that it’s worth it.

I spray painted the assembly after I glued it, and while you don’t need to glue it, I wanted this to be a permanent structure so I used some CA and with a fine needle tip, dispensed a small drop at each joint and let the capillary action draw it into the connector. It’s very durable now, and I left several joints unglued so that I can break it into two pieces for storage. I’ll base it using some small lengths of plasticard epoxied to the bottom and flocked with sand. I may even use some modelling clay or Sculpey to create small berms along the base to make it look as if the structure has been there a while.  What I was going for, in all honesty, is something like a scaled-down version of the”juice” refinery in The Road Warrior. This photo shows what I built, and in retrospect, I really should’ve primed it, but the Rustoleum Hammered Copper spray paint usually sticks to pretty much anything. This is just the first coat, and only sprayed from top down. I ran out, so off to the store I go after work for another to finish the job. Once I’ve got it coated, I’ll airbrush several layers of brown, grey, red, orange, and yellow on it to create a very rusty metal look, then I may or may not hand-paint some “hot spots” of dripping rust effect.

Along with the Hexagon stuff I also got the Pegasus Technobridge, which runs $15.00, and will save me a ton of time having to scratch build it out of Plasticard and balsa. It’s the same as the church stuff, very simple to construct and looks great right out of the box, although I’ll be painting it, probably to match the outpost, and then putting some sand on it here and there to give it a more realistic look. 

Now, Pegasus also creates some pre-painted stuff as well. For fantasy, or even some early American settings, you can buy a lot of small buildings that come ready-to-play. These are made of a hard stone material, perhaps even dental stone, so they’re really rather heavy for their size compared to the Gothic stuff. This Small Stone Cottage cost me $13.00 and its larger brother cost me maybe five dollars more. They’re a single, solid cast piece, so these are really only good to create the feel of a village rather than actually allow you to have door-to-door fighting. I’ve used these for Strange Aeons, and they fit in passably with my 1920’s period pieces fairly well. It beats having to build and paint a Plasticville O-scale building, which I’ll get into in a another Miniatures Gaming 101 article, when all you want is a prop piece to sit on the table as a thematic line-of-sight blocker.

In conclusion, you can get a lot of really great terrain, and I mean an entire city block’s worth, for around a hundred dollars with Pegasus, and the stuff is so easy to assemble, aside from the Hexagon finger-scourge stuff, that it’s a no-brainer. My only complaint with any of it is that they have only a few “lines” to choose from. I’d love if they moved into doing something like Plasticville, but in different time periods. It would certainly save me a lot of time in sourcing parts to kit-bash into what I want. Hope you enjoyed the article, and there’s much more to come.



Share Button

One thought on “Pegasus Hobbies – Making Your Table Shine Without Eviscerating Your Wallet”

  1. Cool stuff Pete. I love the no prep time of boardgame + friends = fun, definitely easier depending on the crowd, but I’ve been missing putting a brush on stuff. Looking forward to more Miniatures Gaming 101.

Comments are closed.